Pools Bundler: lock in your supply at launch on Robinhood Chain
The Pools Bundler launches your token on pools.trade and buys it from up to 20 wallets in the same opening block, before any sniper can react. Instead of a single wallet fighting off the bots watching the network, you split the opening buy across many wallets and secure your share of the supply from second one.
The Smithii fee is fixed at 0.01 ETH, and you don’t need a developer or a single line of code. In this guide we’ll walk you through the Pools Bundler step by step, with no jargon and straight to the point. Let’s dive in.
What is Pools?
Pools (pools.trade) is one of the launchpads running on Robinhood Chain, the network where gas is paid in ETH. Its mechanics differ from other launchpads on the network in one key way: your tokens trade in a Uniswap v4 pool from launch, with no bonding curve in the middle and no graduation to wait for.
That changes the math for anyone launching. On a launchpad with a curve, the bundle competes for the first cheap tickets on the curve. If you launch a token and a sniper or jet catches the first buy, it’s basically guaranteed they’ll dump on the meme coin. On the flip side, if you go overboard with the bundle using the dev wallet, you turn into an absolute red flag.
That’s exactly why the Bundler for Pools on Robinhood Chain exists.
What is the Pools Bundler?
The Pools Bundler is a tool that creates your token on pools.trade and bundles buys from multiple wallets in the same launch block. You configure the token, choose how much your main wallet buys, and add up to 20 extra wallets to the bundle. All of them fire at once, in the same operation that opens the pool.
On wallets that support batching, like MetaMask, Coinbase Wallet, Rainbow, or Trust, the launch and your initial buy travel as a single atomic transaction. Every buy is recorded on-chain and you can verify it on the Blockscout explorer for Robinhood Chain as soon as the block confirms.
Once the bundle is done, check how your token ended up distributed with our guide to viewing the holder list.
Why use a Pools bundler?
Let’s be real: in a Uniswap v4 pool opening at block zero, whoever buys first sets the price for everyone else. Here’s what the Pools Bundler does for you:
- Your supply before anyone else: your wallets buy in the same block the pool opens, so you enter at launch price, not at whatever the bots leave behind.
- Spread across up to 20 wallets: splitting the buy reads as demand from multiple buyers, not one whale piling in all at once.
- A single atomic transaction: on batching-capable wallets, the launch and the buy go together, so there’s no window between creating the token and buying it.
- Built for Pools: it targets the exact Uniswap v4 pool where your token trades from day one, with no migration or graduation to wait on.
- Non-custodial: Smithii doesn’t store or use your wallets, and any ETH that isn’t spent stays right where it was.
New to this ecosystem? Start with our guide on what Robinhood Chain is and how it works.
How to use the Pools Bundler step by step
Getting the Smithii Pools Bundler up and running takes a few minutes and requires zero coding. Open the tool page and follow these steps:
- Connect your wallet on Robinhood Chain. That wallet will be the creator of the token, so make sure you have enough ETH for the fee, your initial buy, and network gas.
- Set up your token: name, ticker, description up to 500 characters, and an image in PNG or JPG up to 1000×1000 px.
- Add your socials if you want: Twitter, Telegram, and website are saved in the token metadata. It’s optional, but a token with no identity performs worse.
- Set your Dev Buy in ETH, the amount your connected wallet buys right after the pool opens, sent alongside the launch.
- Add the bundle wallets with ‘Add Wallet’, up to 20. You can load them via CSV. All of them buy the new pool right after launch, in the same batch as your dev buy.
- Hit ‘Launch on Pools’ and confirm in your wallet. The tool shows you the breakdown first: fee, dev buy, and the total you’re about to fund.
You can verify each wallet’s buy on Blockscout as soon as the block confirms. If what you want is to create a token and keep full control of the supply yourself, mint it with the Robinhood Chain token creator and then bundle the launch.
Recommendation: make the most of Pools’ Bundle Buy and Bundle Sell
The launch bundle is the first move, not the last. With your position already set, you can keep operating in a coordinated way across multiple wallets instead of pushing everything from one spot:
- Pools Bundle Buy: coordinated buys from multiple wallets to reinforce the move after launch.
- Pools Bundle Sell: staggered selling from up to 25 wallets, choosing what percentage of each balance to sell, with a fee of 0.004 ETH.
One technical note worth keeping in mind: since pools.trade tokens trade in a Uniswap v4 pool from launch, the first sell from each wallet also sends a Permit2 approval. Leave a bit of extra gas in each one or the transaction will get stuck halfway.
And a non-technical note: use the bundle sell to manage your exit in an orderly way, never to trick buyers and leave them holding the bag with no liquidity underneath.
How much does the Pools Bundler cost?
The Smithii fee is fixed: 0.01 ETH + gas fee, on top of the gas for each buy transaction, but all these costs usually stay within a minimal range. Every token purchased goes straight to the wallets you added. Smithii does not take a cut of transactions or hold on to tokens.
In case you don’t know us: Smithii Tools is a platform with over 3 years of track record, well established as a toolsuite in the Solana ecosystem. Several of our tools are audited and the platform is designed not to store the information you enter, neither the tokens you work with nor the private keys of the bundle wallets.
What to do after bundling your launch
Having supply is just the start. With the token live and your position secured, the next job is making sure the chart doesn’t go flat, because a pair with no movement is a pair nobody finds. That means volume and constant activity to push your pair into the trending lists.
The most direct route is the Pools Volume Bot, which runs automated buy and sell cycles on your token in the same Uniswap v4 pool. Bundle the launch, then keep the momentum going.
We cover it end to end in the Pools Volume Bot guide on Robinhood Chain.
Launching a meme coin from scratch? Follow our guide on how to create a meme coin on Robinhood Chain before bundling.
FAQ about the Pools bundler
Since Pools went live on Robinhood Chain, we’ve been getting quite a few questions about using a Pools bundler. These are the ones that come up most.
What is a bundler on Robinhood Chain?
A bundler buys your token from multiple wallets in the same block it launches in, so you grab part of the supply before the snipers do. The Pools Bundler does this for tokens launched on pools.trade, which trade in a Uniswap v4 pool from the very first block.
How much does the Pools Bundler cost?
The Smithii fee is fixed: 0.01 ETH per launch. On top of that, you pay the ETH each wallet in the bundle spends buying supply plus the gas for those transactions on Robinhood Chain. The tool itself shows you the breakdown of fee, dev buy and total before you confirm.
How many wallets can I add to the bundle?
Up to 20 additional wallets, on top of your connected one, which is the one that makes the dev buy. You can add them one by one or upload them as a CSV. For selling, the Pools Bundle Sell works with up to 25 wallets.
Which DEX does the Pools Bundler buy on?
pools.trade tokens trade in a Uniswap v4 pool from launch, so the bundler buys right there. There’s no bonding curve or later migration: the pool is active from the block the token is created.
How much gas token do I need?
Robinhood Chain uses ETH as its native gas token, so keep enough ETH on hand to cover the 0.01 ETH fee, the ETH the bundle wallets will spend, and the gas for each transaction. Stablecoins on the network include USDG and USDe.
Conclusion
To wrap it up: on Pools, the Uniswap v4 pool opens at block zero, and whoever buys first sets the price for everyone else. The Pools Bundler is the fastest way to make sure that first buyer is you and not a bot. You buy from up to 20 wallets in the same block, flat 0.01 ETH fee, and zero code.
Don’t have a token yet? Create one with the token creator, bundle its launch, then keep the chart moving with the Pools Volume Bot.
Subscribe to our newsletter to stay on top of every update, get pro tips to squeeze the most out of each tool, and enter the Smithii giveaways.
More Robinhood tools and guides you’ll want to check out
Everything you need to launch and grow a project on Robinhood Chain, no code and with Smithii:
- Get started: What is Robinhood Chain · best wallets
- Create and launch: create a token · create a meme coin · create a liquidity pool
- Distribute: run a token airdrop · airdrop and testnet guide
- Manage and verify: add logo and socials · verify your contract · view the holders list
- Grow: volume bot · market maker
- Bankr bundler · Flap bundler · Trench bundler · Pons bundler · Hood bundler · Clanker bundler · Clanker volume bot
Content creator and SEO contributor at Smithii. Systems Engineering student and crypto-tech enthusiast.
